Comparative Study on Color Stability of Denture Reline Polymers When Using Microwave and Chemical Disinfection

Science Press Release Distribution Services

Comparative Study on Color Stability of Denture Reline Polymers When Using Microwave and Chemical Disinfection

May 5, 2020 Health and Medical Science 0

This study investigated the color stability of reline resin after two methods of disinfection i.e microwave disinfection and chemical disinfection. A stainless steel mold with a breakaway compartment (10 mm in diameter by 0.7 mm thickness) was made to fabricate specimens of various resins. Each material was mixed according to manufacturer’s instructions and applied into the mold. Prior to color stability testing, specimens were cleaned in distilled water for 20 minutes to kill any microorganisms that may had contaminated the discs during fabrication. And then specimens were immersed in Sodium Perborate Monohydrate 200 ml of solution for 15 days and micro waved for 15 days so that it is comparable to chemical disinfection soaking. The color stability of each specimen was measured again using spectrophotometer and values were obtained. The data of ∆E, ∆L, ∆b, ∆a were analysed by 2 way repeated measures ANOVAs test. Significant statistic changes in color parameters ∆L, ∆a, ∆b of the reline resin DPI, Ufi Gel Hard and Kooliner were observed when dentures were disinfected by Sodium Perborate Monohydrate 2% solutions. The color stability of the reline resin was influenced by time, regardless of disinfection or non disinfection. This can be attributed to bleaching (whitening) effect of reline material. Discoloration of resin based materials may be caused by intrinsic or extrinsic factors. Intrinsic factors are related to internal alterations in              material resulting from physicochemical reactions or residual monomer oxidation with time. Thus the initiator, quantity and type of monomer and the polymerisation efficiency can affect the color               stability of resin based materials. The color stability deviation value ∆E significantly increased to maximum for chemical disinfectant, least for Control group and intermediate for microwaved group. Ufi Gel showed the highest deviation ∆E and Control Group showed the lowest deviation according to results.

Author(s) Details
Dr. Farhat Jabeen
Department of Prosthodontics, Himachal Dental College, H.P. 175002, India

Pragya Bali
Department of Prosthodontics, Himachal Dental College, H.P. (175002), India.

View Book: – http://bp.bookpi.org/index.php/bpi/catalog/book/167

 

Leave a Reply

Your email address will not be published. Required fields are marked *